Heat Sealing Foil Facing-FKSV50BC
- TECHNICAL DATA
- GALLERY
- INFO FORM
FKSV50BC
Heat-Sealing Foil-Kraft-Srim Facing, radiant/vapor barrier
Views:392
Product Description
FKSV50BC is a commercialgrade Heat-Sealing Foil -Kraft-Scrim Facing consisting of aluminum foil, 50gsmKraft and square scrim, and then coating heat-activated polyethylene on theKraft side. Closer scrim provides bigger tensile strength in both machine directionand cross direction. It is an ideal facing for thermal insulation materials,suitable for on-line laminating by heating with insulation materials such asglass wool, rock wool, mineral wool etc. No need applying extra adhesive andenvironment friendly. Good corrosion resistance.
Construction
Facing Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Adhesive | Heat-Resistance Glue | -- |
Reinforcing | Glass Fiber Scrim | 12.5 x6.25 mmspace |
Kraft | Natural | 50gsm |
Heat-Activated Coating | Polyethylene | 25 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 105 gsm | Scale |
Tensile Strength | 135 N/25mm- MD | ASTM D828 |
70 N/25mm- XD | ||
Burst Strength | 35 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -29 °C/+66 °C |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Emissivity | 0.03 | ASTM E408 |
Available Roll Width:1.20 m
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.
Similar products
More+- TECHNICAL DATA
- GALLERY
- INFO FORM
FKSV50BC
Heat-Sealing Foil-Kraft-Srim Facing, radiant/vapor barrier
Views:392
Product Description
FKSV50BC is a commercialgrade Heat-Sealing Foil -Kraft-Scrim Facing consisting of aluminum foil, 50gsmKraft and square scrim, and then coating heat-activated polyethylene on theKraft side. Closer scrim provides bigger tensile strength in both machine directionand cross direction. It is an ideal facing for thermal insulation materials,suitable for on-line laminating by heating with insulation materials such asglass wool, rock wool, mineral wool etc. No need applying extra adhesive andenvironment friendly. Good corrosion resistance.
Construction
Facing Composition | Description | Value (Metric) |
Foil | Aluminum | 7 micron |
Adhesive | Heat-Resistance Glue | -- |
Reinforcing | Glass Fiber Scrim | 12.5 x6.25 mmspace |
Kraft | Natural | 50gsm |
Heat-Activated Coating | Polyethylene | 25 micron |
Typical Physical Property
Physical Property | Value (Metric) | Test Method |
Basic Weight | 105 gsm | Scale |
Tensile Strength | 135 N/25mm- MD | ASTM D828 |
70 N/25mm- XD | ||
Burst Strength | 35 N/cm2 | ASTM D774 |
Temperature Resistance | Remains Flexible No Delamination | ASTM C1263 -29 °C/+66 °C |
Dimensional Stability | Less than 0.5% | ASTM D1204 @150F(65C) |
Emissivity | 0.03 | ASTM E408 |
Available Roll Width:1.20 m
Remarks:
1. Above data are typical results and not the guaranteed performance.
2. Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
3. The products should be stored at room temperature away from chemical, wetand heat source. Rolls should never be stored in direct contact with the groundor on concrete slabs.
4. Please do trial-application and make sure the product can serve the specificapplication before actually put it to use.